Description
Availability and Resilience
• Dual-WAN Interface
• Auto fail-over and failback
• Load Balancing
Supported Frequency Bands *1
• Global LTE Bands FDD, TDD& 3G/2G Fallback options (Bands depend on module configuration)
Network Protocols and Features
• IPv4, IPv6, IPv4/IPv6 dual stack*2
• Dual APN*3
• Keep-Alive
• IP Pass-Through
• NAT, Virtual Server, and DMZ
• Static Routing, Dynamic Routing (RIP v1/v2, OSPF, BGP)
• SNTP, DNS relay and DDNS
• Universal Plug and Play(UPnP) compliant
• Supports DHCP server/client/relay
Firewall
• Built-in NAT Firewall
• Stateful Packet Inspection (SPI)
• Prevents DoS attacks including Land Attack, Ping of Death, etc.
• Access Control
• IP Filtering, MAC Filtering, URL Filtering
• Password protection for system management
• VPN Passthrough
VPN
• IPSec VPN Tunneling
• PPTP VPN Tunneling (dial-in/dial-out tunnels)
• L2TP over IPSec VPN Tunneling (dial-in/dial-out tunnel)
• OpenVPN VPN Tunneling
• GRE
Quality of Service Control
• Traffic prioritization based-on IP protocol, port number, and IP address
Wireless LAN
• Compliant with IEEE 802.11b/g/n standards
• Up to 300Mbps wireless operation rate
• WPS (Wi-Fi Protected Setup) for easy setup
• 64/128 bits WEP supported for encryption
• Wireless security with WPA-PSK, WPA2-PSK, Mixed WPA/WAP2-PSK
• Multiple SSID (4 SSIDs), BSSID
• Wireless MAC Filtering
• Wireless Client Isolation
• Wi-Fi Hotspot with captive portal
• RADIUS or integrated account database.
Serial RS-232 / RS-485
• DEC, DB-9
• Modbus/TCP, Telent Server, SSH Server,UDP Server/ Client, TCP Server/ Client
Global Navigation Satellite System(GNSS)*4
• GNSS engine for GPS or GLONASS system
Management
• Password protection for system management
• Web-based GUI for remote and local management
• Firmware upgrade and configuration data upload and download via web-based GUI
• CWMP(TR-069)*2, SNMP
• LTE Usage Allowance
• Remote System Log monitoring
• Scheduling Auto-Reboot
• Physical layer/protocol diagnostic test tool
Intelligent Ignition Sensing
• For In-vehicle connectivity installations
Hardware Specifications
Physical Interface
• LTE: two(2) SMA Female Connectors
• Wireless: two(2) RP-SMA Female Connectors
• (Optional)GPS: one (1) SMA Female Connectors*4
• WAN: LTE and/or Ethernet WAN
• RS-232 / RS-485 (DCE, DB-9):one(1)port
• Ethernet LAN: 4-port 10/100/1000Mbps auto-crossover (MDI/ MDI-X) switch
• SIM Card: two (2) slots
• Reset Button
• Power Connector:4-Pin connector with ignition sense
• LED Indicators
Power Specifications
• Input: DC 10V ~ 56V with ignition sensing
Operating Requirements
• Operating: -40°C to 60°C (-40°F to 140°F)
• Humidity: 20 ~ 95% non-condensing
*Notes:
1. The 4G LTE is dependent on your local service provider.
2. Only upon request for Telco/ ISP tender projects.
3. Dual APN is not supported on some specific SKU, please confirm it with our sales.
4. The support for GPS and/or GLONASS functions depends on the equipped module’s capabilities.
5. Specifications in this datasheet are subject to change without prior notice.
Specifications
WAN Interface | |
---|---|
LTE | ● |
Ethernet WAN | ● GbE |
Hardware Interface | |
---|---|
SIM slot | ● (x2) |
Gigabit Ethernet | ● (RJ45 x4)(Configurable EWAN x1) |
802.11n (2.4 GHz) | ● (300Mbps) |
802.11ac (5 GHz) | – |
GPS | ● (optional) |
mini USB | – |
Serial port (RS-232/RS-485) | ● (DB9 x1) |
Features | |
---|---|
VPN | ● |
IPv4 / IPv6 | ● |
VLAN_MUX | – |
Failover / Fallback | ● |
Load balance | ● |
Dual APNs | ● |
Dual firmware images | ● |
Metal casing | ● |
Hardware Specifications | |
---|---|
Physical Specifications | 4.92″(W) x 1.49″(H) x 3.85″(D)(125 mm x 38 mm x 98 mm) |
Weight | 0.62kg (1.36lbs) |
Power Requirements | DC input steady state voltage range: 10 ~ 56 VDC |
Operating Environment | -40°C ~ 60 °C |
Humidity | 20% – 95% non-condensing |